Latest IncubusCamd

[ТИНТИН]

08/07/2009, V0.87
- fixed a bug on channel change stability
- fixed a bug on ecm cache
- support for caid 0603 on JSC sport channels

Файла се намира на ъплоуд центъра в Home / Sharing Software/incubusCamd_0_87.tar.gz

[marto]

09/07/2009, V0.88
- fixed another bug on irdeto channels

[thunderstorm6]

IncubusCamd v0.88 за Qbox HD!
http://upek.sputnik-sat.info/content.php?id=6021

V0.88
- fixed another bug on irdeto channels

[thunderstorm6]

IncubusCamd v0.89



WARNING: config file is changed a bit, now is less difficult
and many features are added but not completed yet

- added camd33 protocol
- added camd35 protocol
- added possibility to define .prio and SoftCam.Key file directories
- added a check on multi istances of running incubusCamd to prevent
errors (i read that many people start many times the cam and this
will crash connections to servers)
- fixed cccam 2.1.2 support for check on protocol version
- now you can set priority for each provider/caid combination,
by selecting if you prefer the cam will check firstly internal emulator,
card share protocol or internal card reader (not yet implemented the
card reader function, it-s a future plan) check the "check_priority"
option in the config file
- now you can set card share protocol priority, check the
"cs_protocol_order" option in the config file
- changed a bit the configuration file to allow you to set all protocols
data inside the [Servers] section, check the config file to know more
http://www.sat-television.com/showthread.php?t=88176
http://www.x-sat.org/showrecent.php

[thunderstorm6]

05/08/2009, V0.90
- fixed the bug for caid/provider selection for protocols
- optimized a little bit more the protocol selection (lot of improvements)
- added console server interface (you can log by telnet, check the config file: console_logs_broadcast, console_logs_broadcast_port)
- added more infos for current server and info like that, in file /tmp/ecm.info
http://www.dreambox-center.com/forum...showrecent.php

[thunderstorm6]

10/08/2009, V0.91
- fixed a bug on caid tunneling
- fixed a bug when a cw with same old value arrives
- added web interface (the config writer could have some bugs, it is not 100% tested)
- added log of ecm pid selected
- added timeout check on server connection (no more blocking if a fail server is given)
- fixed a check on multi-istances
- added on_screen_messages_ecm and on_screen_messages_emm (emm are disabled, so now is useless), pay attention,
it will pop-up a message on the screen each time an ecm decrypted successfully arrives
- if no more protocol or priority type will be selected (check_priority, cs_protocol_order) nothing will be used by default,
check the config file for more examples and infos
- added possibility to set priority/ignore on ecm pid (check the incubusCamd.prio file for more infos/examples)
- fixed a bug with emu given by cccam protocol servers
- fixed a bug on reading keys from SoftCam.Key file (also added possibility to use char ; or # for comments)
- now all emulators codifies should be ok, i can't test them all, so report if something is wrong (do not forget to use the SoftCam.Key edited
like the one attached in the release pack, because it's not like others softcam.key files)
- fixed a bug on reading config files, wich do not delete spaces ' ' when found

No EMMs are supported yet, so do not hope in that, emms will be implemented in a future version
http://www.skystar.org/misc.php?action=new_files
http://upek.sputnik-sat.info/index.p...now=2009-08-10

[thunderstorm6]

Incubus Camd 0.92

10/08/2009, V0.92

* solved once for all bugs with spaces and comments in config files

* fixed a bug on caid tunneling
* fixed a bug when a cw with same old value arrives
* added web interface (the config writer could have some bugs,
it is not 100% tested)
* added log of ecm pid selected
* added timeout check on server connection (no more blocking if a fail
server is given)
* fixed a check on multi*istances
* added on_screen_messages_ecm and on_screen_messages_emm
(emm are disabled, so now is useless), pay attention, it will pop*up
a message on the screen each time an ecm decrypted successfully arrives
* if no more protocol or priority type will be selected (check_priority,
cs_protocol_order) nothing will be used by default, check the config
file for more examples and infos
* added possibility to set priority/ignore on ecm pid (check the
incubusCamd.prio file for more infos/examples)
* fixed a bug with emu given by cccam protocol servers
* fixed a bug on reading keys from SoftCam.Key file (also added possibility
to use char ; or # for comments)
* now all emulators codifies should be ok, i can't test them all, so report if
something is wrong (do not forget to use the SoftCam.Key edited
like the one attached in the release pack, because it's not like others
softcam.key files)
* fixed a bug on reading config files, wich do not delete spaces ' ' when found

No EMMs are supported yet, so do not hope in that, emms will be implemented in a future version.
http://upek.sputnik-sat.info/content.php?id=6226
http://209.85.129.132/search?q=cache...k&client=opera

[marto]

V0.93
- fixed ecm pid debug log for biss encryption
- fixed a bug on filters (more stability)
- add seca2/seca3 handler (i suggest to use it only on providers wich uses both seca2 and seca3 with same provid value,
like TVVlandeeren and Canal Digitaal)
- fixed bug on reading prio/ignore
- updated web interface
- newcamd and radegast are now managed in a better way, no more connecting/disconnecting is done if no server
is disconnected before (or the connection would be broken)
- fixed a bug wich will not find card on cccam protocol if multi provider (like seca2/seca3 pids) are declared with the same values
- added emm management (it works only with newcamd servers wich use the EMM in the config line, do not forget to enable also
"process_emms_on_cs_mode" and your emm-g/s/u blocker options)
- fixed some bugs with timeshift using original dgs based firmwares (if you find more bugs report them as usually)
- fixed some bugs with PIP using original dgs based firmwares (if you find more bugs report them as usually)

EMM for internal emu will be enabled when testers will report emm are working ok with almost all codifies.
Do not forget this is a beta version so it could be some EMM will not work as expected, but i can't test every codify
in the world and every smart card for each provider, so... you know, just report what works and what does not!

[thunderstorm6]

29/04/2010, V0.99
- fixed a bug on support for multi newcamd lines
- fixed a bug on support for multi radegast lines
- fixed a bug on EMM manager using newcamd protocol
- some memory leak bugs fixed on cccam protocol and multi service

http://www.sat-planet.net/showpost.p...95&postcount=4

[Didko]

11/05/2010, V1.00
- fixed a bug on Irdeto 2 channels over cccam protocol
- added log for ChID value if Irdeto channel is selected
- fixed some auto reconnections bugs (for all protocols)
- fixed EMM filters for Dreamcrypt
- first try to fix Conax EMMs
- fixed EMM filters for Cryptoworks

http://www.denktenk.com/modules/wfdo...cid=5&lid=2130