Имиджи за Dreambox

[thunderstorm6]

b1_10.boxman-03012010.img
A new, current CVS image from tonight for the DM7000:

Incl. Simple EUROPE Satellites_XML by Reinh @ rd (02.01.2010).

with scsi modules
With modules usb
Modules with autofs
Modules with cifs
Modules with reiserfs
Modules with smbfs
with-webif = expert (Ver. 6.0.4-Expert)
with enable-maintainer-mode
with enable-flash rules
with epg = private
with MHW-epg = yes
with flash tool = expert
with ext flash tool = yes
with enigma-debug = yes
With pmt.tmp
With Tuxtxt
With freesatepg

Games and plug-ins you can download via the "setup-> expert setup-> package manager-> install package (online)"

Language: only English and German

Driver from 22.10.2007

New:
cccam on feed-support
feedsatepg-support
TuxCom no fixed moment in

http://www.badongo.com/file/19510118
http://www.super-sat.info/index.php?...bc5a97a5cd030d

[thunderstorm6]

Backup_Darkstar2-7000.img_multiboot_BY_ANTR@G

Backup Darkstar2 Multiboot

Law sky and tivusat
put the sky card 0919 in the slot below
Tivusat put the card into the slot above
======================
legge sky 0919 e tivusat
mettere la carta sky nello slot di sotto
mettere la carta Tivusat nello slot di sopra
======================
Oscam1083_CCcam_2.1.3

Nabilo CCcam Info

CCcam Advanced Menu

CCcam Adv. Menu lite

criptinfo

keydownload

softcamdownload

setting Vhannibal Dual Feed

http://www.tv-files.info/index.php?d...ctory=Dreambox

[thunderstorm6]

Backup_Dddemon-dm7000_BY-ANTR@G


For sky 0919 & Tivusat

DDdemon Immaggine
e una originale cvs
con CCcam_oscam
visiona sky 0919 slot inferiore
tivusat slot superiore
dal tasto blu potete scaricare le key
addons potete scaricare i setting
astra hotbird motor
======================
DDdemon Image
and an original cvs
with CCcam_oscam
Watch 0919 slot less
tivusat top slot
the blue button you can download the key
addons you can download the settings
astra hotbird motor
======================
CCcam 2.1.4/Oscam

CCcam Info

criptinfo

WeekEPG 3.2b

keydownload

softcamdownload

setting Vhannibal Dual Feed

http://www.ysharing.com/en/file/132/...m7000-rar.html

[thunderstorm6]

BackupImage EDG_Nemesis_DM7000 BY ANTR@G
Emus

CCcam_2.0.11_oscam

For sky 0919

CCcam 2.0.11

CCcam_2.1.3

Scam 3.57

Mgcamd 1.31

CCcam Info

Cryptinfo

k**download

softcamdownload

setting Vhannibal

http://www.sat-planet.net/showthread.php?t=14932

[thunderstorm6]

Dm600pvr Enigma2 TestImage of 20100214


Here is the new updated version of the TestImage - hope you like it.

Features

enigma2-2.7git100212

Quick-buttons

Blue (short press) - DF-II Menu
Blue (long press) - Extensions
Power (short press) - Standby
Power (long press) - Shutdown menu
INFO (short press) - event info
INFO (long press) - Graphical multi epg

Led

Standby - red led
Recording - blinking red led

Please note :-

This image is particularly suitable for installing in flash.
If installing in flash - it is very important use the feature "Increase available memory" soon after first bootup.

High definition (HD) skins BrushedAlu-HD and dmm-HD have been modified for the non-HD boxes. These have been further modified for this image to hdd versions so that, when installed, they use only 1 kb of flash memory each.

Special facility to copy media files (mpg, mp3, mpeg4, divx, dvd) from pc to dreambox hdd and play later directly from the hdd without pc.

Note: When you remove (uninstall) a skin via Addon Manager - check that it is deleted from /usr/share/enigma2. Sometimes ipkg remove does not work completely !

Extra Setup includes :-

Readme (very important). All Readme files are in folder /etc. Please copy and translate (with google for example) if necessary.

Softcam-manager

Increase memory : Necessary for flash install

Addon-manager : Download and install addons

Software : Additinal softeare items necessary for plugins

EPG : Two methods e2_loadepg and EPGUpdate/ViewEPG. Method e2_loadepg is described in the Readme. For the EPGUpdate method - configure source and update with plugin EPGUpdate. Once epg is updated - view with plugin ViewEPG.

Subtitles : Change ttx subtitles size and colour

Media/MountManager : Cifs and Nfs mount configure,
MountManager,
Copy media to dreambox

User-Script manager

Inadyn, Pmt.tmp, Crond configure

Picon

Infobar date language : Change date language

Streaming media from pc to dreambox : vlcplayer, youtbeplayer etc.

Streaming tv to pc : Install webinterface. On pc open webif browser.
Click on tv icon. Select Open to start VLC.

Configure VLC 0.8.6 :- Settings - Preferences - Iinterface-Main Interface - Select Advanced - Select HTTP and in HTTP Hostaddress insert :8080

Settings - Preferences - Video - Select Fullscreen output

Settings - Preferences - Stream output - Default stream output chain - insert #display :sout-all and select all boxes.

Available for download from server :-

Plugins

vlcplayer-enigma2-testimage_1.0_powerpc.ipk
youtubeplayer-enigma2-testimage_1.0_powerpc.ipk
enigma2-plugin-extensions-myspaceviewer_1.01_all.ipk
enigma2-plugin-extensions-musicvideos_0.1_all.ipk
nrkplayer_0.1-r0_powerpc.ipk
svtplayer_0.1-r0_powerpc.ipk
enigma2-plugin-extensions-filebrowser_1.0_powerpc.ipk
barryallen.v4.6.56_1_powerpc.ipk
tuxtxt_0.1-r0_powerpc.ipk
cccaminfo-v1.3_svn-2736-r0_powerpc.ipk
permanentclock_2_powerpc.ipk
mediacenter.v0.92_1_powerpc.ipk
dreamexplorer.v1.5_1_powerpc.ipk
graphmultiepg_1_powerpc.ipk
epg2cf-enigma2-testimage_1.0_powerpc.ipk
epg2usb-enigma2-testimage_1.0_powerpc.ipk
enigma2-plugin-extensions-skintransp_0.4.0-r0_powerpc.ipk
googlemaps_2.6cvs20090407-r0_powerpc.ipk
mosaic_2.6cvs20090407-r0_powerpc.ipk
webcamviewer-pictureviewer_2.6cvs20090407-r0_powerpc.ipk
enigma2-plugin-extensions-autotimer_2.6cvs20090407-r0_powerpc.ipk
enigma2-plugin-extensions-emailclient_2.6cvs20090407-r0_powerpc.ipk
enigma2-plugin-extensions-epgsearch_2.6cvs20090407-r0_powerpc.ipk
enigma2-plugin-extensions-orf_1.0_all.ipk
enigma2-plugin-extensions-zdfmediathek_0.1.0_powerpc.ipk
enigma2-plugin-extensions-fritzcall_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-httpproxy_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-logomanager_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-mediadownloader_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-passwordchanger_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-simplerss_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-startuptostandby_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-trafficinfo_2.6cvs20090820-r0_powerpc.ipk
enigma2-plugin-extensions-webinterface_2.6cvs20090820-r0_powerpc.ipk

Skins

brushedalu-mod_1.0_skin_powerpc.ipk
brushedalu-mod-hdd_1.0_skin_powerpc.ipk
dmm-mod_1.0_skin_powerpc.ipk
dmm-mod-hdd_1.0_skin_powerpc.ipk
Nemesis.GlassLine.II-mod-tunhj1_1_powerpc.ipk
x2line_1.0_skin_powerpc.ipk
lt-chromeline-cobolt-mod-tunhj1_0.1-r0_powerpc.ipk
blueline-metall_1.0_skin_powerpc.ipk

Software

python-pyopenssl_0.6-r0_powerpc.ipk
twisted-web_8.1.0-r0_powerpc.ipk
python-crypto_1.9a6-r1_powerpc.ipk
python-html_2.5.1-ml3_powerpc.ipk
python-imaging_1.1.5-r1_powerpc.ipk
python-shell_2.5.1-ml3_powerpc.ipk
python-textutils_2.5.1-ml3_powerpc.ipk
twisted_8.1.0-r0_powerpc.ipk
twisted-web2_8.1.0-r1_powerpc.ipk
zope-interface_3.3.0-r0_powerpc.ipk
python-email_2.5.1-ml3_powerpc.ipk
twisted-mail_8.1.0-r0_powerpc.ipk


Many thanks to all the friends of TestImage for encouragement and advice, in particular to erdbeere for the new bootlogo !
Also special thanks to DragJusto of w*w.4Reackt.net for providing the addon server !
Regards, pcd.

http://www.dreamboxfile.com/DM600/Im...010-02-14.html
http://www.megaupload.com/?d=O0Y0G2BT

[thunderstorm6]

NEW DM500 image with UNICABLE support

dpeddi
Quote:I've prepared an image for DM500 with unicable support using the attached imagetool-maxvar.zip

This image is a merge of following images:

-Boot, kernel, bootlogo, with some files removed to make space
Gemini_0470_DM500_max_var_12122009.img.zip

-Smaller busybox from
scvs-dm500-maxvar-pppd-09122008.img

- Enigma and related files from extracted image using customized nfi2cf-0.1
adenin-unicable-dm600pvr-20070914.zip

Since enigma from adenin image is really big, i had to:
- remove some font
- remove skin
- remove some image for web interface
- remove gemini plugins
- remove dyndns daemon
- remove ssh daemon
but who cares... i need scr support...

Like the adenin-unicable-dm600pvr-20070914.zip you have to:
Select the satellite configuration in the listbox "22kHz" UNICABLE.
In "LNB" you can then select the channel (SaTCR) and its frequency.

First release without webif
DPEDDI_DM500_max_var_LnbSCR-20100215.zip

Second release with webif
DPEDDI_DM500_max_var_LnbSCR_webif-20100215.zip

Regards

PS: many thanks to adenin and all others for your work.

http://www.sat-universe.com/showpost...1&postcount=54
http://www.i-have-a-dreambox.com/wbb...postid=1173200

[thunderstorm6]

DM-500S Tuck ® Jade3 Maxvar Cccam.2.1.4Special Backup
DM-500S Tuck ® kıpkıp Full image backup-specific Jade3 maxvar cccam.2.14

* You will not find in any forum for myself I have carefully arranged all of them work together with the plugins I currently use the image itself is ...
* There is no certainty Backupta with TimeBomp
* Nevertheless, responsibility does not accept responsibility until aittir.Forumumuz.
* I recommend you take before you install your spare ...
* After installation your spare Cccam.cfg var / etc you can simply throw into ..
* Black as a skin matrix by MX is installed.
* I've used and I have carefully arranged setting and 9 satellites are set with 8 +1 Baff dayzek brand.
* Satellites can be seen in the image below to order ...
* Yellow button and plug-ins includes 12 pieces plugin would argue that such a forum such features sarıtuş not given any extension.
* Displaying information in bar otamatikman CCcam information.
* Channel switching speeds will be surprised ... because all of them are hungry as fta ... ..
* Backupda occupancy is 77%.
* Bye-bye, use ...
* These images further support and information to improve everyone shared hope here not spared ....
http://www.sat-planet.net/showthread.php?t=17041
http://hotfile.com/dl/29333679/e63d7...ackup.rar.html

[thunderstorm6]

Punt@l DM 500 Maxvar Fusion V0.30 Fix A

Punt@l Fusion V0.30 A

Quote:Technical Infos:
* Enigma of: January.2010
* GCC Original CVS
* Web Interface: 5.0.9 Expert
* Busybox 1.13


What's new on this version V0.30 A:

- Correction of Strips for operation of other emulators
- New Topbalks

About Puntal

- Default Skin from Porto New default skin Bluzzy
- Internal Picons System ( Not necessary picon plugin. Picons are image internal ). Only to enable option in Extra Setup).
- picons location settings ( /var/tuxbox/icon/ ). default.png for no pics avaibility
- Enable logging file off misssing Service icons ( Only enable in Extra Setup).
- Internal Smartcam picons. ( Only to enable option in Extra Setup).
- Picons location settings ( /var/tuxbox/icon/ ). defaultemu.png for no pics avaibility
- Enable logging file off misssing Smartcam icons ( Only enable in Extra Setup).
- Preview in Skin Selector manager with no Preview skins image.
- GUI CRONManager setup and stop / start in Deamon Panel
- GUI Inadyn setup and stop / start in Deamon Panel
- Restart in Shoutdown menu (useful when change settings)
- Date (short format) to OSD info
- Videoformat to OSD info
- Maxvar
- Free timebomb

Function Buttons:
* BLUE Puntal Panel
* YELLOW Puntal Manager
* RED EPG list for active channel (EPG; MultiEPG)
* BLUE - SoftCam Manager (Start - Restart - Change - Auto Provider - Auto Channel ECM INFO IN PANEL)

--- SmartCam Blue Panel (BLUE BUTTON)
# Smartcam.config /var/etc/punt@l#

Syntax:
osd-name 1 = CI
emulator 1 = Common Interface
camd 1 =
daemon 1 =
optional 1 =
kill 1 =
sleep 1 =
zap-sleep 1 =

osd-name 2 = RADEGAST
emulator 2 = Radegast [Puntal ]
camd 2 = camd.rdgd
daemon 2 = rdgd
optional 2 = np_init
kill 2 = netpilot
sleep 2 = 10
zap-sleep 2 = 3

osd-name 3 = NEWCAMD
emulator 3 = newcamd [vx.xx]
camd 3 =
daemon 3 = cardserver.dream
optional 3 = newcamd.ppc
kill 3 =
sleep 3 = 5
zap-sleep 3 = 7


osd-name = NEWCAMD
# This is the name that is written on the info bar in Enigma

emulator 3 = newcamd [vx.xx]
# This is the name displayed in Puntal sm@rtcam

camd 3 =
#In one of the enigma models, the camd needs to be re-started after #*EVERY* zap. the camd is the program name that needs to be ***cuted #after a zap. in the case of Radegast, its camd.rdgd (in other cases the #appropriate camd needs to be ***cuted) Some emulators dont use camd - #so this field is left blank

daemon 3 = newcamd.ppc
# The daemon us used to start the main Emulator. This is only started once #when switching emulators

optional 3 = cardserver.dream
#The option line starts any supplimentary programs. In the case of Radegast, #netpilot is started.

kill 3 =
# If a script starts an application, then the smartcam needs to know what #application has to be removed from memory. If the 'optional' field is a script #called 'loader.sh' and loader.sh starts up another allication, then the 'kill' #field must have the applications name in order to kill it when the emulators #need to start. For example -
# optional 3 = np_init (and np_init starts netpilot) then
# kill 3 = netpilot

sleep 3 = 5
#The sleep time is the delay between starting the camd and the daemon. (seconds)

zap-sleep 3 = 7
#This time is to wait for the smartcam to instruct Enigma to re-zap the #channel after a switch over. This is only done once after an emulator is #started. (Seconds)

* BLUE -> RED Deamon Panel Inadyn Cron setup
* BLUE -> GREEN Save default cam and Provider and Channel Autocam
* BLUE -> BLUE Puntal Panel
* BLUE -> YELLOW Restart smartcam

--- Extra Settings (BLUE -> BLUE BUTTON) THX to hydra
* Downloads
* News
* Run Scripts
* Fully costumizable Puntal Panel /var/etc/punt@l
Syntax:

<directory>

<category name="Emu's">
<softcam name="Evocamd 2.14" url="h**p://webserver/package.tar.gz" target="/"/>
</category>
<separator/>
<category name="Download Plugins...">
<tarball name="BitrateViewer 1.3" url="h**p://webserver/panel/plugins/bitrate1.3_dm7000.tar.gz" target="/"/>
</category>
<addonmgr name="Addon Manager..."/>
<separator/>
<category name="Ecm-Info Emulator-Info ...">
<***cute name="ECM-Info..." target="/var/script/Ecm.info_userscript.sh"/>
</category>
<separator/>
<category name="Hard Disk Settings...">
<***cute name="HDD Sleep!" target="/sbin/hdparm -Y /dev/ide/host0/bus0/target0/lun0/disc"/>
</category>
<separator/>
</directory>

#Yellow Panel#

*System information Many extra box infos
*Display list of plugins to run
*Show Missing Picons from Service
*Show MGshare information
*Show MGStart information
*Show MG configuration

Basic Features:
* Puntal addon server via internet.
* SoftCam: Emu can be linked to channels/provider
* ECM INFO AVAILABLE DIRECTLY IN Puntal PANEL
* OSD: Extra Info switchable
* OSD INFO:
*** netcard_info
*** ecm_info
*** pro_name
*** feq
*** pol
*** sr_snr
*** fc_fec
*** cam_info
*** crypto_info irdeto_ecm seca_ecm via_ecm nagra_ecm cw_ecm ***_ecm conax_ecm beta_ecm
*** icon smartcard
*** icon emu
*** icon network
*** Date

Smartcam output
*** EcmInfo
*** ProviderInfo
*** DecodeInfo
*** CardAmount
*** PeerAmount
*** OnlinePeerAmount
*** Caid
*** Pkey
*** Cards
*** Keynr
*** Pid
*** Allpid
*** fta
*** video_format
*** eprogressbars THX to PLI
*** CCcam / Mgcamd / camd3 / Evocamd info in OSD
*** start plugins associate to the emulator
*** ecm.info full support for cccam / mgcamd / evocamd / camd3

No Emu Inside.
======================

Thank you to all opensource projects

- Hydra
- Nemesis
- Pli
- Merlin
- Punt@l
Thank to all friends from Punt@l

http://www.sat-planet.net/showthread.php?t=16516

[thunderstorm6]

Punt@l Fusion V0.30 Final


Technical Infos:
* Enigma of: January.2010
* GCC Original CVS
* Web Interface: 5.0.9 Expert
* Busybox 1.13

About Puntal

- Default Skin from Porto New default skin Bluzzy
- Internal Picons System ( Not necessary picon plugin. Picons are image internal ). Only to enable option in Extra Setup).
- picons location settings ( /var/tuxbox/icon/ ). default.png for no pics avaibility
- Enable logging file off misssing Service icons ( Only enable in Extra Setup).
- Internal Smartcam picons. ( Only to enable option in Extra Setup).
- Picons location settings ( /var/tuxbox/icon/ ). defaultemu.png for no pics avaibility
- Enable logging file off misssing Smartcam icons ( Only enable in Extra Setup).
- Preview in Skin Selector manager with no Preview skins image.
- GUI CRONManager setup and stop / start in Deamon Panel
- GUI Inadyn setup and stop / start in Deamon Panel
- Restart in Shoutdown menu (useful when change settings)
- Date (short format) to OSD info
- Videoformat to OSD info
- Maxvar
- Free timebomb

Function Buttons:
* BLUE Puntal Panel
* YELLOW Puntal Manager
* RED EPG list for active channel (EPG; MultiEPG)
* BLUE - SoftCam Manager (Start - Restart - Change - Auto Provider - Auto Channel ECM INFO IN PANEL)

--- SmartCam Blue Panel (BLUE BUTTON)
# Smartcam.config /var/etc/punt@l#

Syntax:
osd-name 1 = CI
emulator 1 = Common Interface
camd 1 =
daemon 1 =
optional 1 =
kill 1 =
sleep 1 =
zap-sleep 1 =

osd-name 2 = RADEGAST
emulator 2 = Radegast [Puntal ]
camd 2 = camd.rdgd
daemon 2 = rdgd
optional 2 = np_init
kill 2 = netpilot
sleep 2 = 10
zap-sleep 2 = 3

osd-name 3 = NEWCAMD
emulator 3 = newcamd [vx.xx]
camd 3 =
daemon 3 = cardserver.dream
optional 3 = newcamd.ppc
kill 3 =
sleep 3 = 5
zap-sleep 3 = 7


osd-name = NEWCAMD
# This is the name that is written on the info bar in Enigma

emulator 3 = newcamd [vx.xx]
# This is the name displayed in Puntal sm@rtcam

camd 3 =
#In one of the enigma models, the camd needs to be re-started after #*EVERY* zap. the camd is the program name that needs to be executed #after a zap. in the case of Radegast, its camd.rdgd (in other cases the #appropriate camd needs to be executed) Some emulators dont use camd - #so this field is left blank

daemon 3 = newcamd.ppc
# The daemon us used to start the main Emulator. This is only started once #when switching emulators

optional 3 = cardserver.dream
#The option line starts any supplimentary programs. In the case of Radegast, #netpilot is started.

kill 3 =
# If a script starts an application, then the smartcam needs to know what #application has to be removed from memory. If the 'optional' field is a script #called 'loader.sh' and loader.sh starts up another allication, then the 'kill' #field must have the applications name in order to kill it when the emulators #need to start. For example -
# optional 3 = np_init (and np_init starts netpilot) then
# kill 3 = netpilot

sleep 3 = 5
#The sleep time is the delay between starting the camd and the daemon. (seconds)

zap-sleep 3 = 7
#This time is to wait for the smartcam to instruct Enigma to re-zap the #channel after a switch over. This is only done once after an emulator is #started. (Seconds)

* BLUE -> RED Deamon Panel Inadyn Cron setup
* BLUE -> GREEN Save default cam and Provider and Channel Autocam
* BLUE -> BLUE Puntal Panel
* BLUE -> YELLOW Restart smartcam

--- Extra Settings (BLUE -> BLUE BUTTON) THX to hydra
* Downloads
* News
* Run Scripts
* Fully costumizable Puntal Panel /var/etc/punt@l
Syntax:

<directory>

<category name="Emu's">
<softcam name="Evocamd 2.14" url="http://webserver/package.tar.gz" target="/"/>
</category>
<separator/>
<category name="Download Plugins...">
<tarball name="BitrateViewer 1.3" url="http://webserver/panel/plugins/bitrate1.3_dm7000.tar.gz" target="/"/>
</category>
<addonmgr name="Addon Manager..."/>
<separator/>
<category name="Ecm-Info Emulator-Info ...">
<execute name="ECM-Info..." target="/var/script/Ecm.info_userscript.sh"/>
</category>
<separator/>
<category name="Hard Disk Settings...">
<execute name="HDD Sleep!" target="/sbin/hdparm -Y /dev/ide/host0/bus0/target0/lun0/disc"/>
</category>
<separator/>
</directory>

#Yellow Panel#

*System information Many extra box infos
*Display list of plugins to run
*Show Missing Picons from Service
*Show MGshare information
*Show MGStart information
*Show MG configuration

Basic Features:
* Puntal addon server via internet.
* SoftCam: Emu can be linked to channels/provider
* ECM INFO AVAILABLE DIRECTLY IN Puntal PANEL
* OSD: Extra Info switchable
* OSD INFO:
*** netcard_info
*** ecm_info
*** pro_name
*** feq
*** pol
*** sr_snr
*** fc_fec
*** cam_info
*** crypto_info irdeto_ecm seca_ecm via_ecm nagra_ecm cw_ecm ***_ecm conax_ecm beta_ecm
*** icon smartcard
*** icon emu
*** icon network
*** Date

Smartcam output
*** EcmInfo
*** ProviderInfo
*** DecodeInfo
*** CardAmount
*** PeerAmount
*** OnlinePeerAmount
*** Caid
*** Pkey
*** Cards
*** Keynr
*** Pid
*** Allpid
*** fta
*** video_format
*** eprogressbars THX to PLI
*** CCcam / Mgcamd / camd3 / Evocamd info in OSD
*** start plugins associate to the emulator
*** ecm.info full support for cccam / mgcamd / evocamd / camd3


Languages inside Portuguese and English

Support : www.estudo-digital.com & www.4reackt.net

No chaves, No Emu Inside.
======================

Thank you to all opensource projects

- Hydra
- Nemesis
- Pli
- Merlin
- Punt@l


http://www.speedyshare.com/files/211...v0.3_Final.rar
http://www.mediafire.com/?n2tjbm4ecmd
http://rapidshare.com/files/35486511...v0.3_Final.rar

[thunderstorm6]

Punt@l Fusion V0 [1] 3 Final


Technical Infos:
* Enigma of: January.2010
* GCC Original CVS
* Web Interface: 5.0.9 Expert
* Busybox 1.13

About Puntal

- Default Skin from Porto New default skin Bluzzy
- Internal Picons System ( Not necessary picon plugin. Picons are image internal ). Only to enable option in Extra Setup).
- picons location settings ( /var/tuxbox/icon/ ). default.png for no pics avaibility
- Enable logging file off misssing Service icons ( Only enable in Extra Setup).
- Internal Smartcam picons. ( Only to enable option in Extra Setup).
- Picons location settings ( /var/tuxbox/icon/ ). defaultemu.png for no pics avaibility
- Enable logging file off misssing Smartcam icons ( Only enable in Extra Setup).
- Preview in Skin Selector manager with no Preview skins image.
- GUI CRONManager setup and stop / start in Deamon Panel
- GUI Inadyn setup and stop / start in Deamon Panel
- Restart in Shoutdown menu (useful when change settings)
- Date (short format) to OSD info
- Videoformat to OSD info
- Maxvar
- Free timebomb

Function Buttons:
* BLUE Puntal Panel
* YELLOW Puntal Manager
* RED EPG list for active channel (EPG; MultiEPG)
* BLUE - SoftCam Manager (Start - Restart - Change - Auto Provider - Auto Channel ECM INFO IN PANEL)

--- SmartCam Blue Panel (BLUE BUTTON)
# Smartcam.config /var/etc/punt@l#

Syntax:
osd-name 1 = CI
emulator 1 = Common Interface
camd 1 =
daemon 1 =
optional 1 =
kill 1 =
sleep 1 =
zap-sleep 1 =

osd-name 2 = RADEGAST
emulator 2 = Radegast [Puntal ]
camd 2 = camd.rdgd
daemon 2 = rdgd
optional 2 = np_init
kill 2 = netpilot
sleep 2 = 10
zap-sleep 2 = 3

osd-name 3 = NEWCAMD
emulator 3 = newcamd [vx.xx]
camd 3 =
daemon 3 = cardserver.dream
optional 3 = newcamd.ppc
kill 3 =
sleep 3 = 5
zap-sleep 3 = 7


osd-name = NEWCAMD
# This is the name that is written on the info bar in Enigma

emulator 3 = newcamd [vx.xx]
# This is the name displayed in Puntal sm@rtcam

camd 3 =
#In one of the enigma models, the camd needs to be re-started after #*EVERY* zap. the camd is the program name that needs to be executed #after a zap. in the case of Radegast, its camd.rdgd (in other cases the #appropriate camd needs to be executed) Some emulators dont use camd - #so this field is left blank

daemon 3 = newcamd.ppc
# The daemon us used to start the main Emulator. This is only started once #when switching emulators

optional 3 = cardserver.dream
#The option line starts any supplimentary programs. In the case of Radegast, #netpilot is started.

kill 3 =
# If a script starts an application, then the smartcam needs to know what #application has to be removed from memory. If the 'optional' field is a script #called 'loader.sh' and loader.sh starts up another allication, then the 'kill' #field must have the applications name in order to kill it when the emulators #need to start. For example -
# optional 3 = np_init (and np_init starts netpilot) then
# kill 3 = netpilot

sleep 3 = 5
#The sleep time is the delay between starting the camd and the daemon. (seconds)

zap-sleep 3 = 7
#This time is to wait for the smartcam to instruct Enigma to re-zap the #channel after a switch over. This is only done once after an emulator is #started. (Seconds)

* BLUE -> RED Deamon Panel Inadyn Cron setup
* BLUE -> GREEN Save default cam and Provider and Channel Autocam
* BLUE -> BLUE Puntal Panel
* BLUE -> YELLOW Restart smartcam

--- Extra Settings (BLUE -> BLUE BUTTON) THX to hydra
* Downloads
* News
* Run Scripts
* Fully costumizable Puntal Panel /var/etc/punt@l
Syntax:

<directory>

<category name="Emu's">
<softcam name="Evocamd 2.14" url="http://webserver/package.tar.gz" target="/"/>
</category>
<separator/>
<category name="Download Plugins...">
<tarball name="BitrateViewer 1.3" url="http://webserver/panel/plugins/bitrate1.3_dm7000.tar.gz" target="/"/>
</category>
<addonmgr name="Addon Manager..."/>
<separator/>
<category name="Ecm-Info Emulator-Info ...">
<execute name="ECM-Info..." target="/var/script/Ecm.info_userscript.sh"/>
</category>
<separator/>
<category name="Hard Disk Settings...">
<execute name="HDD Sleep!" target="/sbin/hdparm -Y /dev/ide/host0/bus0/target0/lun0/disc"/>
</category>
<separator/>
</directory>

#Yellow Panel#

*System information Many extra box infos
*Display list of plugins to run
*Show Missing Picons from Service
*Show MGshare information
*Show MGStart information
*Show MG configuration

Basic Features:
* Puntal addon server via internet.
* SoftCam: Emu can be linked to channels/provider
* ECM INFO AVAILABLE DIRECTLY IN Puntal PANEL
* OSD: Extra Info switchable
* OSD INFO:
*** netcard_info
*** ecm_info
*** pro_name
*** feq
*** pol
*** sr_snr
*** fc_fec
*** cam_info
*** crypto_info irdeto_ecm seca_ecm via_ecm nagra_ecm cw_ecm ***_ecm conax_ecm beta_ecm
*** icon smartcard
*** icon emu
*** icon network
*** Date

Smartcam output
*** EcmInfo
*** ProviderInfo
*** DecodeInfo
*** CardAmount
*** PeerAmount
*** OnlinePeerAmount
*** Caid
*** Pkey
*** Cards
*** Keynr
*** Pid
*** Allpid
*** fta
*** video_format
*** eprogressbars THX to PLI
*** CCcam / Mgcamd / camd3 / Evocamd info in OSD
*** start plugins associate to the emulator
*** ecm.info full support for cccam / mgcamd / evocamd / camd3


Languages inside Portuguese and English


No chaves, No Emu Inside.
======================

Thank you to all opensource projects

- Hydra
- Nemesis
- Pli
- Merlin
- Punt@l


Thank to all friends from Punt@l
http://www.sat-universe.com/showthread.php?p=557894